The process is pretty straightforward and you’ll need to follow the steps that we take you through. It will be an hour or two before you have an up-and-running Wi-Fi connection ready to be used. Make sure you have the prerequisites set in order before moving to the next process.
Preliminary Steps for Router’s Setup
There are three steps that you need to keep in mind before setting up the router. These are essential for both the setup and configuration.
1. Test the Internet Connection
Firstly, if you already have a modem or gateway to which you’re connecting the router, then we assume that the internet source will be working fine. However, if you’re shifting to a new house, building, or workplace, then checking the internet before installing the router is necessary. So you’ll be getting a new internet service in the fresh location which should be working up to the minute. Nevertheless, it’s still recommended to check the connection. Here’s how to do it: Note: If there’s no ethernet port on your device, then use an ethernet adapter.
2. Read the Router’s Documentation
Most of the users ignore the documents that come with a router, although it is very helpful to read the instructions there. It won’t only help you with setting up the router, but your admin username and password will be there too.
3. Fit and Extend the Antennas
Many routers come with antennas in the box. They are useful for strengthening and propagating Wi-Fi signals. Just simply install the antennas with screws and extend them.
Setting up the Router
Before you configure your new home router, it’s obligatory to do its setup first. Again, there are three steps that you should keep in check.
1. Place the Router in a Suitable Spot
First and foremost, the router needs to be placed in an open place in your home, workplace, or anywhere else. It would be even better if you place it in the center and at a good height. This way, the Wi-Fi signals can transmit to all four directions. In case the Wi-Fi is set up in a corner, the signals will become weak and you’ll have a hard time surfing the internet. Secondly, ensure not to place the router near any metal objects and appliances like microwaves.
2. Power on the Router
Upon powering up, the router should be working properly. The lights should start blinking and changing colors. For instance, when you plug in some routers, their power icon turns from red to green indicating that the router is running now. Certain routers take some time to start, so be patient for a moment. We would also recommend seeing which one is the power indicator icon on your router. The information will be available in the user manual.
3. Connect the Router to an Internet Source
The internet source can be an ISP Gateway, a modem, a DSL cable, or others. Anyway, you need to connect it to your router via an ethernet cable for the internet to start working. The internet sources are the ones that will enable the router to propagate Wi-Fi signals and the devices to connect with the network. Here’s how to connect the router to your internet source: Note: This port will either be colored differently or have the internet source’s name written on top of it. Moreover, it can also be separated from other ports in a corner.
Configuring the Router
Now that we have done the setup for the home router, it’s time to configure it. Here, we’ll be changing its password and updating the firmware. Furthermore, settings for the Wi-Fi encryption will be changed before connecting devices to the network.
1. Change your Router’s Admin Password
Every router comes with a default admin username and password. It is recommended to change at least the password, if not the username. This will allow only you to access the web portal of your router and make the changes. The settings to change the password will vary for different routers. But generally, you will find the password option under security settings. Follow the steps below to change your router’s admin password: Note: Some routers have their own app that allows you to change the settings from there.
2. Update the Firmware of your Router
While you’re in the router’s web interface, it is better to update its firmware as well. Many manufacturers release new updates from time to time, which can be easily downloaded. The updates are mostly related to security protocols, so it’s essential to always keep your router up-to-date. The update settings are different for each vendor, so follow the steps below to find out yours.
3. Change the Password and Encryption of your Wi-Fi
More often than not, routers come with a default SSID and password. SSID is basically the name of your Wi-Fi that will show up while scanning. You’ll find both of them on the back of your router. We recommend changing them in the settings since default passwords are easy to crack and SSIDs are not unique. Moreover, the encryption for your network needs to be WPA2 and not WEP. The latter is outdated and doesn’t provide the much-needed security for your network connection. You’ll find both the password and encryption settings in the same tab in many routers. They will usually be under Wireless > Security.
4. Connect your Devices to the Wi-Fi Network
Now that your new home router’s setup is complete and you don’t want to configure it further, it is time to connect your devices to the Wi-Fi network and start using the internet.
