Why Wont DS4Windows Detect the Controller in Windows 10?
There could be several reasons for this problem, which include:
Windows 10 Update: The latest update of Windows 10 could restrict the use of DS4 Controllers.Malfunctioning Device Drivers: DS4 controller device drivers might be malfunctioning, which can be resolved by reinstalling the drivers.Controller Disabled by DS4Windows: DS4Windows could accidentally disable the controller from being used in Windows 10.
1. Uninstall and Reconnect DS4 Controller Device
By uninstalling the driver, you remove any potentially corrupt or conflicting settings that might be causing the issue. When you reconnect the DS4 controller after this reset, Windows will attempt to reinstall the drivers as if the device is being connected for the first time. This can often clear up any problems associated with the controllers inability to connect, essentially allowing for a fresh start in terms of device recognition and functioning.
2. Re-enable DS4 Controller
Some users have experienced this issue during gameplay, i.e., the DS4 controller stops working and becomes disabled automatically. By going into the Device Manager and re-enabling the DS4 controller, you are basically making the device visible and active again, allowing DS4Windows to recognize the controller and re-establish the necessary communication for gameplay.
3. Uninstall Windows Update
When you uninstall a recent Windows update, you are basically reverting your computer’s operating system to an earlier state. This may remove any new changes that could be conflicting with DS4Windows and its ability to detect your controller. By rolling back these updates, you’re eliminating any new variables that might be causing the connectivity troubles, potentially restoring your setup to its previously functional configuration.
4. Uninstall Driver and Set DS4Windows Up
By removing the existing driver, you allow Windows to reinstall a fresh driver upon reconnection. This renewal can often clear any configuration issues or corrupt files that were causing the device to malfunction. After the fresh installation of drivers, setting up DS4Windows makes sure that the controller is configured correctly and recognized properly by your system for optimal performance.
5. Scan for Hardware Changes
Scan for hardware changes prompts Windows to re-evaluate all connected hardware devices. This re-evaluation forces the operating system to detect any previously unrecognized connected hardware, such as your DS4 controller, potentially resolving any connection issues that came from drivers that were not properly recognized or installed during initial connection.
