After Windows removed the Homegroup feature in version 1803, many people started using TFTP servers for easier file sharing. SolarWinds TFTP Server is a popular option because it’s easy to set up and works well for moving files across networks.
Requirements:
Before you set up your TFTP server, ensure the following requirements are met: Once you meet all the requirements, you can set up the server.
Remote Access or Local Access
To allow access from outside your local network, use a static IP or whitelist your dynamic IP. By default, the TFTP server allows all IP addresses, but with port forwarding, you can define a specific IP range for access.
Set up the TFTP Server
Follow these instructions to set up the server: Your TFTP Server is now set up successfully.
Use the TFTP Server
After setting up a TFTP server, here’s how to send or receive files: Port Forward – If you need remote access, forward port 69. Access your router’s control panel, go to Advanced Setup, locate NAT or Port Forward, and enter UDP port 69 on your IPv4 address. Note, port forwarding isn’t required for local transfers.
Install TFTP Client
To install the TFTP Client on a remote or local system: This should be installed on systems not hosting the server.
Configure the Firewall to Allow TFTP
After installing the TFTP client, either disable Windows Firewall or add an exception for TFTP connections:
Transfer Files using TFTP
To transfer files after installing the TFTP client and forwarding UDP port 69: For remote file transfers, use this format: Example:
